Hello.
I purchased my 2002 smart pulse a year ago and it already had a panisonic head unit fitted in it. This was fine, however when I switched the ignition off, the next time I got into the car the head unit had reset and the stored stations had gone and it was back to factory settings.
After a year I'm starting to get a bit annoyed with it and am looking at getting it fixed.
I have looked at the wiring and it would appear that some of the wires from the head unit don't match up to the car wiring. I have looked at this and identified the power wires apart from the speaker wires, but I still can't work it out.
So the car wires are like this
1 - brown
2 - pink/blue
3 - brown/white
4 - empty
5 - blue
6 - empty
And from my head unit they are patched like this...
2 - black - which connects to brown (1) car wire
1 - red (acc) - which connects to pink/blue (2)car wire
3 - blue/white (remote) - which connects to a blank connector on the car loom
4 - blank
5 - blank
6 - yellow (battery) - which connects to Blue (5) car wire
I'm just not sure which wire from the head unit should be meeting which wire in the car loom?
Any ideas? Thanks
I purchased my 2002 smart pulse a year ago and it already had a panisonic head unit fitted in it. This was fine, however when I switched the ignition off, the next time I got into the car the head unit had reset and the stored stations had gone and it was back to factory settings.
After a year I'm starting to get a bit annoyed with it and am looking at getting it fixed.
I have looked at the wiring and it would appear that some of the wires from the head unit don't match up to the car wiring. I have looked at this and identified the power wires apart from the speaker wires, but I still can't work it out.
So the car wires are like this
1 - brown
2 - pink/blue
3 - brown/white
4 - empty
5 - blue
6 - empty
And from my head unit they are patched like this...
2 - black - which connects to brown (1) car wire
1 - red (acc) - which connects to pink/blue (2)car wire
3 - blue/white (remote) - which connects to a blank connector on the car loom
4 - blank
5 - blank
6 - yellow (battery) - which connects to Blue (5) car wire
I'm just not sure which wire from the head unit should be meeting which wire in the car loom?
Any ideas? Thanks
Comment