The Project Begins

[6F00T4]

Re: The Project Begins

Cool, keep us posted although I've been talking via e-mail lately.

[David_MCS]

Re: The Project Begins

Cool, keep us posted although I've been talking via e-mail lately.

[David_MCS]

Re: The Project Begins

Update - 17/03/2009

I picked this up yesterday..





This should certainly do the job!

I've also been working on my welding skills and can say its definitely something everyone should try! Very easy once the welding kit is setup for the type and thickness of the metal .

More updates soon.

David

[6F00T4]

Re: The Project Begins

I know what you mean about welding!!! You just get it right for thick subframe stuff, then have to weld an exhaust, blow hole central!!! Just started using flux core wire (gas-less), very nice results, plus you can work outside.

ps. just did a little sex wee looking at your quaife diff!!

[David_MCS]

Re: The Project Begins

It's nice isn't it? Lifetime guarentee also

I'm using a co2 150amp mig using 0.8mm wire, very nice results!

[David_MCS]

Re: The Project Begins

Update - 20/03/2009

Everythings at the powdercoaters! Here's a before picture..



I'll take an 'after' picture once i get these back early next week.

I've also purchased some bearings to sit on either side of the diff, i'll be bending up the tubing previously purchased and welding together a rough design for the rear subframe.

To be continued..

[Alski]

Re: The Project Begins

I love to see projects on here, 6foot4's smart powered by the A series block and Pam Gazeys Smart powered by the Mr2 block.
Keep going people as it's all exciting stuff!!

[MINTY]

Re: The Project Begins

Are you looking for a single bucket seat for that thar project?

[David_MCS]

Re: The Project Begins

Are you looking for a single bucket seat for that thar project?

Two i'm afraid

[Big Performance]

Re: The Project Begins

David, how about Carbon Fibre seats.?
Specific to fit both the roadster AND the for2

[MINTY]

Re: The Project Begins

Two i'm afraid

Worth a shot.

All the best with it.

[David_MCS]

Re: The Project Begins

David, how about Carbon Fibre seats.?
Specific to fit both the roadster AND the for2

Whats the cost?

[NeuroBeaker]

Re: The Project Begins

Well, this certainly looks like a thread worth keeping up with!

*subscribe*

I just did a little sex wee!

ps. just did a little sex wee looking at your quaife diff!!

You seem to do that a lot. :wag: Easy does it, you don't want to run out. :p

All the best,
Andrew.

[6F00T4]

Re: The Project Begins

Well, this certainly looks like a thread worth keeping up with!

*subscribe*







You seem to do that a lot. :wag: Easy does it, you don't want to run out. :p

All the best,
Andrew.

don't worry, i won't! do you want some then? xx

[David_MCS]

Re: The Project Begins

Update - 29/03/2009

My rear calipers should be here tommorow or tuesday, so should my parts from the powder coaters

David