If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Well I drove home ok all lights that was ment to be on was on it started fine etc so not sure must be for something else optional I guess no worries cheers thou ! Wish I hadn't started that today lol
Got a few other questions
1) is this the wire where the remote goes to--
2)can I use power cable as my ground as the one I got does fit in length to where I'm putting it and my power cable is more than long enough ??
1 yes
2 yes, but be sure to make them noticeably different like a bit of insulation tape each end, remember to make your ground as short as possible so I'm sure what u have should be long enough
1 yes
2 yes, but be sure to make them noticeably different like a bit of insulation tape each end, remember to make your ground as short as possible so I'm sure what u have should be long enough
1) sweet
2) yeah I just don't want be drill or punching holes in the car so putting it to the already ground bolt there as from the pik before-- that's still ok isn't it ?
its great to see you moving on with this. good effort mate
Oh cheers mate just only after finishing work and getting beaten by the day light going it's just moving at a slow pace but I'm happy with coz ill only rush and then wish I didn't do something that way going slower lets ya have a good think
Yeah the problem with me is I'll want to try do it the best and neatest I can and yeah iv put the power and ground down the passenger side of the centre console taped the remote to the RCA put that down the drivers door side and the tweeter cable with it and the door speaker cable down the drivers side down the centre console sound ok
Yeah the problem with me is I'll want to try do it the best and neatest I can. yeah iv put the power and ground down the passenger side of the centre console taped the remote to the RCA put that down the drivers door side and the tweeter cable with it and the door speaker cable down the drivers side down the centre console sound ok
Hears a question for all these who has put new door speakers in there fortwo !! How did you run the speaker wire ?? It looks like it's gonna get a nightmare job ??
It depends on how thick your speaker wires are. There is a cable route already which you can use but as it has the electric windows and door lock wires in it, there isn't a lot of room left for thick speaker wires.
Comment