The idea was taken, not original (minus for me).
1-DSCF1481.JPG
From a 17mm thick plate textolit I cut two jaws.
The one I drill a 5mm drill bits and threaded with the M6. In it I put a M6 bolt that I am stuck with a nut.
1-DSCF1482-002.JPG
In the second, we drill it with M6,5.
1-1-DSCF1482.JPG
A butterfly nut M6 completed device.
1-DSCF1481.JPG
From a 17mm thick plate textolit I cut two jaws.
The one I drill a 5mm drill bits and threaded with the M6. In it I put a M6 bolt that I am stuck with a nut.
1-DSCF1482-002.JPG
In the second, we drill it with M6,5.
1-1-DSCF1482.JPG
A butterfly nut M6 completed device.
Comment