Announcement

Collapse
No announcement yet.

Brabus exhaust for Roadster?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    I have actually ordered the mounting parts from my local dealer but I am still looking for the rear bodypart needed.
    I have just sent a mail to http://www.online-parts.co.uk/smart/

    Jörgen

    Comment


    • #17
      That site looks dodgy! Is it actually part of "smart of York"?
      Because nothing else indicates to me that it is.
      I'll contact smart of York to check.

      In retrospect, I suppose "supercalafragalisticexpialadocious" wasn't a great "safe word..."

      Comment


      • #18
        Item 20 on this is the Brabus rear. Does it fit to a standard Roadster? I guess the item 19 don't fit.




        Jörgen

        Comment


        • #19
          You need everything as listed Item 20 to fit a Brabus Exhaust

          Comment


          • #20

            Q0019129V000000000 Screw M6x30 £0.60
            Q0007458V001000000 Locking plate £0.96
            Q0018938V001000000 Vibration damper £47.76
            Q0014246V002000000 strut holder bottom £6.30
            Q0014244V002000000 strut holder top £8.10
            Last edited by mac999; 20-05-14, 08:33 PM.

            Comment


            • #21
              Perfect!
              So it fits the standard rear?

              Jörgen

              Comment


              • #22
                Originally posted by Big Performance View Post
                Q0019129V000000000 Screw M6x30 x1
                Q0007458V001000000 Locking plate x1
                Q0018938V001000000 Vibration damper x1 ( epc states 2 pieces? )
                Q0014246V002000000 strut holder bottom x1
                Q0014244V002000000 strut holder top x1
                It seems they don't have it all at my local merc dealer!
                I have
                2pc Q0018938 V001 000000 Vibration damper
                1pc Q0014244 V002 000000 strut holder top
                1pc Q0019129 V000 000000 Schraube

                I am missing
                Q0007458V001000000 Locking plate
                Q0014246V002000000 strut holder bottom


                What is it I am missing?
                Can I make it myself or can I get it from somewhere else?

                Jörgen

                Comment


                • #23
                  Originally posted by mac999 View Post
                  You need everything as listed Item 20 to fit a Brabus Exhaust
                  Originally posted by krassegrand View Post




                  Jörgen
                  I have a dilemma!
                  Item 20 fits on the standard rear but Brabus painted middle rear does not go very well with the rest of the Wasp as it is not colour-coded like the Brabus.
                  Now Little Blackie is colour-coded as a Brabus so there it fits very well with the rest of the car but the exhaust don't fit on the 45kw turbo! I drive the Wasp and would enjoy the sound much more that my wife.
                  Maybe I buy the item 20 and see if item 19 fits on the standard rear after hitting it with a hacksaw? Then I could fit the rest to Blakie and.......

                  Well well!
                  Jörgen
                  Last edited by krassegrand; 22-05-14, 03:58 PM.

                  Comment


                  • #24
                    Many people have retro fitted item 20 to a standard roadie (to replace the bottom of item 6, I.E item 9) but a hacksaw could come in useful.

                    Comment


                    • #25
                      If your wasp is yellow with a black tridion and the Brabus rear valence is black, no problem; Silver Brabus valance might* even go with a silver tridion?

                      Comment


                      • #26
                        Originally posted by Rodzter View Post
                        If your wasp is yellow with a black tridion and the Brabus rear valence is black, no problem; Silver Brabus valance might* even go with a silver tridion?
                        Good point!

                        Comment


                        • #27
                          Originally posted by krassegrand View Post

                          It seems they don't have it all at my local merc dealer!
                          I have
                          2pc Q0018938 V001 000000 Vibration damper
                          1pc Q0014244 V002 000000 strut holder top
                          1pc Q0019129 V000 000000 Schraube

                          I am missing
                          Q0007458V001000000 Locking plate
                          Q0014246V002000000 strut holder bottom


                          What is it I am missing?
                          Can I make it myself or can I get it from somewhere else?

                          Jörgen
                          I really need to find out how the 2 remaining parts look like if I am going to make them myself!
                          Can anyone tell me the thickness of the plate in the "strut holder bottom" and the "locking plate" so that I can cut them from a sheet of steel?
                          I have the rest of the mounting parts in house.

                          Jörgen

                          Comment


                          • #28
                            Originally posted by Big Performance View Post
                            Q0019129V000000000 Screw M6x30 x1
                            Q0007458V001000000 Locking plate x1
                            Q0018938V001000000 Vibration damper x1 ( epc states 2 pieces? )
                            Q0014246V002000000 strut holder bottom x1
                            Q0014244V002000000 strut holder top x1
                            Can You get the
                            Q0007458V001000000 Locking plate x1 and
                            Q0014246V002000000 strut holder bottom x1
                            For me?

                            Jörgen

                            Comment


                            • #29
                              I checked this out!
                              on picture 5 it looks like the locking plate is in mid air!
                              http://www.fq101.co.uk/how-to-guides...s-exhaust.html
                              Can someone explain that to me?

                              Jörgen

                              Comment


                              • #30
                                Do any of You have pictures of the mountings and how they are supposed to sit?
                                I have the upper mounting and are only missing the lower mounting and the mounting plate for the upper vibration damper.
                                By the way, were does the second vibration damper go?

                                Jörgen

                                Comment

                                Ad Widget

                                Collapse
                                Working...
                                X