TV touch screen ?

[Smartjames]

Re: TV touch screen ?

Do u mean no bass when fitted or open like your pic, if pic don't worry to much, if fitted then I would advise adding sound deadening like silent oat between the speaker and door and around the door.

U will not get alot of bass from these as the crossover will limit it as u will have a sub which will play the sub frequencies

No here not fitted as I wanted to test them first before the hard challenge of putting them in the doors ! So you think it might just be where it's not in the door yet it's quite a bit difference fro the normal ones to them thou !


Sent from my iPad

[adrimo]

Re: TV touch screen ?

Do u mean no bass when fitted or open like your pic, if pic don't worry to much, if fitted then I would advise adding sound deadening like silent oat between the speaker and door and around the door.

U will not get alot of bass from these as the crossover will limit it as u will have a sub which will play the sub frequencies

[Smartjames]

Re: TV touch screen ?

The user manual for the Head unit will tell you how to access all the different menus settings. If you have got a user manual, go to the manufactures web site and download a copy.

Take the earth lead off, have another go at scraping back to bare metal. Use fine emery cloth and also scrape the eyelet (both sides).

The correct + and - minus they are talking about is not the main power to the head unit or the Amp but the polarity of the speaker connections. (Speakers have a + and a - marked on the connectors)

Are you sure the Amp is powering up? It should have a LED that shows when it is on. What is your Amp powering? Just a Sub speaker or Sub and full range / Mid range speakers?

Maybe the Head unit has a setting which turns on the SUb output? This is why you need the user manual.

John

Well I don't have the user manual so I'll try search for it online I guess and ok I'll have a another go in grounding it there ! Was going to say how will if go about grounding it on the engine wall or what that's called just about the hand break bit ?

And yes I have just gone through the speaker wires as on the tweeters and door speakers I got have + and - on them so as far as I'm aware they are correct.

The amp has a light on it soon as power goes to it it's red then when it done it's check it goes bright white so as I'm aware it's powering up and powering focal tweeters and haven't got a sub yet sorry not sure what they called ie: quote Just a Sub speaker or Sub and full range / Mid range speakers?

And I'll have to try look up how to set up the radio then maybe just wired that I got sound out of them just not really a lot bass and the don't seem to working fully !



Sent from my iPad

[heinkeljb]

Re: TV touch screen ?

The user manual for the Head unit will tell you how to access all the different menus settings. If you have got a user manual, go to the manufactures web site and download a copy.

Take the earth lead off, have another go at scraping back to bare metal. Use fine emery cloth and also scrape the eyelet (both sides).

The correct + and - minus they are talking about is not the main power to the head unit or the Amp but the polarity of the speaker connections. (Speakers have a + and a - marked on the connectors)

Are you sure the Amp is powering up? It should have a LED that shows when it is on. What is your Amp powering? Just a Sub speaker or Sub and full range / Mid range speakers?

Maybe the Head unit has a setting which turns on the SUb output? This is why you need the user manual.

John

[Smartjames]

Re: TV touch screen ?

This pik is for problemchild as you mentioned it before but I was waitin for it and now i got it in the post today better ;-)



Sent from my iPhone

[Smartjames]

Re: TV touch screen ?

I would check the earth again and make sure it's a good connection.

Leave the speaker wire but leave speaker part of connection unplugged from head unit

Make sure you have + and - correct way fitted

As for bass what setting do u have on your amp and head unit and how did u set the gains?

Well I did it off the seat bolt and scrapped away to bear metal,this not good enough then

And is that just that whole block? Is speaker then ?

And I believe I have done the + and - properly through out the system !

That was what I got told you just have to sort out the system with messing with all the buttons now but I haven't got the foggiest idea on we're to start !


Sent from my iPhone

[adrimo]

Re: TV touch screen ?

I would check the earth again and make sure it's a good connection.

Leave the speaker wire but leave speaker part of connection unplugged from head unit

Make sure you have + and - correct way fitted

As for bass what setting do u have on your amp and head unit and how did u set the gains?

[Smartjames]

Re: TV touch screen ?

The fuzz is the noise from a bad earth normally

You may have one of the speakers wired the wrong way and thus the 2 cancel each other out.

JJ

Thanks least this is a starting point cheers mate


Sent from my iPhone

[problemchild1976]

Re: TV touch screen ?

The fuzz is the noise from a bad earth normally

You may have one of the speakers wired the wrong way and thus the 2 cancel each other out.

JJ

[Smartjames]

Re: TV touch screen ?

Also I have a slight fuzz in the back ground ?

And the other thing was what do it do with the wiring from the original speakers just leave them in there ?


Sent from my iPhone

[Smartjames]

Re: TV touch screen ?

Help people iv set it all up "as far as im aware" but I'm not getting the base /loudness out the door speakers what have I done wrong anyone ?


Sent from my iPhone

[Smartjames]

Re: TV touch screen ?

Cool cheers well going to be doing it after work today so hopefully when thats all done all it will be is the door speakers

That's going to be, drill the hole through the wing metal wall grommet it wire through thread it to the door speaker and that's if it's a straight fit !


Sent from my iPhone

[heinkeljb]

Re: TV touch screen ?

Use heat shrink tubing if you are going to solder. Electrical insulating tape will eventually unwind and leave a horrible sticky mess!

John

[Smartjames]

Re: TV touch screen ?

Ok thanks for the info guys I might aswell solder then as I do have a soldering kit ;-) so that will be ok to solder it then some electrical tape round it to finish it off !


Sent from my iPhone

[cougar7609]

Re: TV touch screen ?

I solder everything I do on the car, even the spade connectors this came from having many minis and water and corrosion was a problem