If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
its great to see you moving on with this. good effort mate
Oh cheers mate just only after finishing work and getting beaten by the day light going it's just moving at a slow pace but I'm happy with coz ill only rush and then wish I didn't do something that way going slower lets ya have a good think
1 yes
2 yes, but be sure to make them noticeably different like a bit of insulation tape each end, remember to make your ground as short as possible so I'm sure what u have should be long enough
1) sweet
2) yeah I just don't want be drill or punching holes in the car so putting it to the already ground bolt there as from the pik before-- that's still ok isn't it ?
1 yes
2 yes, but be sure to make them noticeably different like a bit of insulation tape each end, remember to make your ground as short as possible so I'm sure what u have should be long enough
Well I drove home ok all lights that was ment to be on was on it started fine etc so not sure must be for something else optional I guess no worries cheers thou ! Wish I hadn't started that today lol
Got a few other questions
1) is this the wire where the remote goes to--
2)can I use power cable as my ground as the one I got does fit in length to where I'm putting it and my power cable is more than long enough ??
After most of the day running my wires I found this hanging out and don't no where it belongs can anyone advise me please would say the ignition areas as the wire is too short to reach anywhere else ? Anyone ?
The last picture you showed with the head unit wired in, but not slotted into the car shows a blue/white wire with a "BLUE" tag on it - that is the wire that is connected to the remote turn on / off of the amp.
Ok so as iv been stripping back things to run the wires properly and easy this is under the passengers seat and saw that there is a bolt there that my ground will fit on nice and easy which is also being used as a ground wire this will be ok won't it ??
Leave a comment: